- +27(0) 11 948 7934
- [email protected]
- Mon - Fri: 7:00 - 16:30. Weekends by appointment
- Address : Plot 7, R554, Eikenhof, Johannesburg
Lathes
All machines shown are in stock and ready to purchase
Visit our Showroom in Johannesburg, or request an online machine demonstration.

Quality Woodwork Machinery

Certified Pre-owned Machines

Top Class Service and Support
Lathes in stock and immediately Available
All machines below are in stock and available right now at our premises in Johannesburg, South Africa. 🇿🇦
Come visit our showroom or request an online demo video.
All machines are sold serviced, reconditioned and carry a quality guarantee unless otherwise specified.
-
Ideal for small parts like spindles, small bun feet and legs. Fully reconditioned, a true gem. Max length of workpiece – 250mm Max blank (workpiece) size – 70 x 70mm Carriage advance system and back travel
-
R149,000Max. distance between centres mm. 1200 Height of centres over bed mm. 120 Max. copying diameter mm. 150 (106) Max. diameter permitted by travelling steady mm. 90 (65) Connection for driving and tailstock centre CM 3 Saddle feed speed 0 ÷5 mt/min. Saddle return speed 5 mt/min. Spindle motor HP 4 (kW 3) Spindle speed 900 - 1500 - 2200 – 3000 r.p.m. Motor power of hydraulic unit HP 1 (kW 0,75) Installed power kW 3,75 Operating pressure bar 25 ÷ 30 Overall dimensions: Length x Height x Width mm. 2400x650x1540
-
- Fully checked, serviced and in excellent running condition. - 380volt
-
- Fully checked, serviced and in excellent running condition. - 1200mm maximum length of component - Voltage:380 volts,3 phase 50hz
-
Serviced & in good working condition Max. distance between centres – 1500mm Height of centres on table – 240mm Max. turning diameter – 460mm Gouge support (Tool rest) – 350mm Spindle rotation speed - 900-1500-2100-2800 RPM Revolving tailstock Motor – 2HP Overall dimensions – 2450mm x 500mm x 1450mm Weight – 250kg
-
Max length of work piece: 1200 mm Adjustable Base plate for Router Different gears supplied for various patterns Voltage: 220 volts,50hz
-
380volt Max work piece length: 1000mm between centres Three Back knives Voltage: 380 volts, 3 phase, 50hz
Lathes in stock and immediately Available
All machines below are in stock and available right now at our premises in Johannesburg, South Africa. 🇿🇦
Come visit our showroom or request an online demo video.
All machines are sold serviced, reconditioned and carry a quality guarantee unless otherwise specified.
-
Ideal for small parts like spindles, small bun feet and legs. Fully reconditioned, a true gem. Max length of workpiece – 250mm Max blank (workpiece) size – 70 x 70mm Carriage advance system and back travel
-
R149,000Max. distance between centres mm. 1200 Height of centres over bed mm. 120 Max. copying diameter mm. 150 (106) Max. diameter permitted by travelling steady mm. 90 (65) Connection for driving and tailstock centre CM 3 Saddle feed speed 0 ÷5 mt/min. Saddle return speed 5 mt/min. Spindle motor HP 4 (kW 3) Spindle speed 900 - 1500 - 2200 – 3000 r.p.m. Motor power of hydraulic unit HP 1 (kW 0,75) Installed power kW 3,75 Operating pressure bar 25 ÷ 30 Overall dimensions: Length x Height x Width mm. 2400x650x1540
-
- Fully checked, serviced and in excellent running condition. - 380volt
-
- Fully checked, serviced and in excellent running condition. - 1200mm maximum length of component - Voltage:380 volts,3 phase 50hz
-
Serviced & in good working condition Max. distance between centres – 1500mm Height of centres on table – 240mm Max. turning diameter – 460mm Gouge support (Tool rest) – 350mm Spindle rotation speed - 900-1500-2100-2800 RPM Revolving tailstock Motor – 2HP Overall dimensions – 2450mm x 500mm x 1450mm Weight – 250kg
-
Max length of work piece: 1200 mm Adjustable Base plate for Router Different gears supplied for various patterns Voltage: 220 volts,50hz
-
380volt Max work piece length: 1000mm between centres Three Back knives Voltage: 380 volts, 3 phase, 50hz
Need a Quote?
Simply leave your details below and we will get back to you shortly with a quote.
